SCHUBERTH SRC SYSTEM - 2. Retail Box Contents; 3. Charging the Headset

24
2. CONTENTS OF THE RETAIL BOX
SRCSYSTEM™ FOR S2 HELMETS*
Antenna
Connector
USB Connector
• Charging Jack
• Software Download Port
• AUX
2 Speakers
Channel A Button
• Connect to Rider A
• MP3 Button
Channel B Button
• Connect to Rider B
• FM Radio Button
Volume Up /
Forward
Button
Volume Down /
Rewind Button
Corded
Microphone
Mobile Button
*oered in dierent sizes
Wall charger plug
USB adapter cable
Velcro® pads
MP3 cable
Microphone sponges
Speaker pads
User Manual, stickers
IMPORTANT:
The cover protecting the micro USB Connector should be kept tightly closed at all
times to prevent moisture from entering the device.
3. CHARGING THE HEADSET
Make sure that your headset is fully charged for at least four hours
before initial use.
1. Open the cover protecting the Charging Jack.
2. Insert the USB cable into the Charging Jack.
3. Insert the other end of the USB cable into
the wall charger or a computer’s USB port.
4. While charging, the red LED turns on. When
charging is complete, the red LED will turn o.
Your wall charger and USB adaptor cable serve
two purposes:
1. Charging your headset from any A/C wall socket or from a USB port on
your computer (charging time from computer takes longer)
2. Downloading software upgrades from any PC running Windows® XP™,
Vista™ or Windows 7. (see section 4.3 for details).