OPERATION
FX-318 - FX212 08/21 Operation Section 4-20
© 2021 Alamo Group Inc.
OPERATION
• Ensure the tractor PTO master shield is in
place, lowered and in good condition.
• Ensure each mower slip clutch shield is
secured in place and in good condition.
• Ensure the driveline slip clutch friction plates
are not frozen together. Reference the
Maintenance Section for proper slip clutch
maintenance.OPS-R-0010_G
• Perform scheduled lubrication as specified in
the maintenance section.
• Inspect each gearbox oil level using sight glass
indicator and replenish if needed. A low oil level
is a warning sign that the gearbox may be
cracked or its seal is damaged and needs to be
replaced.
• Ensure all gearbox vents are in place and free
from clogs. OPS-R-0011_U
• Ensure each hydraulic cylinder is installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinders in place and
are secured with pins.
• Check for hydraulic oil leaks on the cylinders,
along the hydraulic lines, and at tractor
hydraulic ports.
IMPORTANT: DO NOT use your hands to check for
oil leaks. Use a piece of heavy paper or cardboard
to check for hydraulic oil leaks. OPS-R-0013_E
To Next Page
Loading...
