2.9 Filter cleaning display
Off No display
5 programmes After the set number of programmes have run, the message "Clean filter C"
up to is displayed. The message disappears when the filter is removed.
25 programmes
2.10 Maintenance interval
No No instruction to maintain the machine will appear.
500 - 4000 After this number of programmes the notification "Machine maintenance due"
will be displayed. After a further 50 programmes the notification will be
displayed again, thereafter after every 10th programme, until the counter is
zeroed.
500 – 4000 After the course of the set number of programmes, the notification "Machine
mandatory maintenance due“ is displayed.
After a further 50 programmes no further programmes can be performed until
the counter is zeroed (the number of programmes that can still be carried out
will be shown at every programme start).
Zeroing the "Maintenance interval" counter:
Enter the service function.
Select Reset maintenance counter.
The programme counter is zeroed.
2.11 Power outage AutoStart
No The programme remains stopped after a power cut. The programme resumes
by pressing the start button.
Yes The programme continues automatically after a power cut.
This setting has no meaning in EFH machines. The programme always
continues to run automatically after a power failure.
3 Settings for the customer
The individual settings are described in chapter Settings of the respective operating instructions.
4 Test programmes
Test programmes are called up as described in chapter Machine parameters.
Select the Test programmes menu after entering the service code.
The chosen test programme starts automatically.
To Next Page
Loading...
