39
4. CLEANING
Proper cleaning of the paint spray is a prerequisite for its correct operation. In case of lack of cleaning or improper
cleaning, the warranty rights will be cancelled.
• Turn the product off and unplug it from the electrical grid;
• Unscrew the paint container and empty the rest of the material into the original packaging;
• Clean the container and the delivery pipe carefully with the aid of a brush;
• Insert a small amount of solvent or water into the container and screw it to the gun.
• Reconnect your paint spray again and make it work. Direct the solvent or water to the inside of a container
or cloth. Never spray the environment. Avoid polluting the environment;
• Repeat this stage until you realize your equipment is completely clean;
• Turn your equipment off and unplug it from the electrical grid;
• Clean the external region of the product with a cloth moistened with solvent or water;
• Unscrew the union nut, remove the paint regulator and the spraying nozzle. Clean the paint regulator and the
spraying nozzle with a brush with solvent or water (see Figure 9.10);
• Reassemble all parts and keep your equipment in proper place.
- Diaphragm and the holes of the spraying nozzle with sharp metal objects.
- Do not overload your equipment. Long hours of use can damage the product.
ATTENTION
- Always use protection masks and proper PPE’s. Avoid breathing mist of paint because
it can cause problems to your health
ATTENTION
- Never block the air passage holes completely.
- Never exceed the recommended pressure. The object to be in ated can break apart or cause personal injury.
IMPORTANT
FIGURE 9.10
A
B
To Next Page
Loading...
