Schumacher DSR164 User Manual

Lithium Ion Jump Starter
and USB Power Source
OWNERS MANUAL
MODEL
DSR164
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This
manual will explain how to use the unit safely and effectively. Please read and follow
these instructions and precautions carefully.
0099002382-02

Schumacher DSR164 Specifications

General

Brand	Schumacher
Model	DSR164
Category	Remote Starter
Language	English

Summary

Important Safety Instructions

Risk of Explosive Gases

Warning about handling batteries that generate explosive gases during normal operation. Follow specific instructions.

Risk of Electric Shock or Fire

Warning about electrical hazards, including keeping the unit away from children and flammable materials.

Personal Safety Precautions

Eye Protection and Clothing

Wear protective gear and have help nearby when working near lead-acid batteries for safety.

Handling Battery Acid Spills

Procedure for neutralizing acid spills with baking soda and seeking medical attention for contact.

Removing Metal Items

Remove metal jewelry to prevent short circuits and severe burns from battery current.

Lithium Ion Battery Fire Safety

Instructions for extinguishing lithium ion battery fires and cooling the product to prevent re-ignition.

Features

Control Panel

LED Indicators

Explanation of the status and behavior of the Ready and Fault LEDs during operation and charging.

Function Buttons

Details on the operation of the Power, Light, and Jump start/Override buttons for various functions.

Charging the Internal Battery

Checking Internal Battery Level

How to check the current charge level of the jump starter's internal battery using the Power button.

Charging via AC Wall Charger

Instructions for fully charging the jump starter using the 100V-240V AC wall charger.

Charging While Driving (DC)

Procedure for charging the internal batteries using the 12V DC car charger while the car is running.

Operating Instructions

Jump Starting a Vehicle

Step-by-step guide for jump starting a vehicle, including clamp connection and starting procedures.

Starting a Battery with Low Voltage

Procedure for enabling the jump start function when the vehicle's battery voltage is too low.

Using the USB Port

Instructions for charging external devices using the 5V DC, 2.4A USB output port.

Using the Work Light

How to operate the built-in work light, including different modes and turning it off.

Maintenance and Storage

Cleaning and Storage Conditions

Guidelines for cleaning the unit, charging before storage, and ideal storage temperature ranges.

Battery Maintenance

Recommendations for charging frequency and avoiding complete discharge to maintain battery health.

Troubleshooting

Jump Starter Won't Jump Start

Common causes and solutions when the jump starter fails to start a vehicle.

Jump Starter Not Operating

Troubleshooting steps for when the jump starter unit itself does not power on.

Battery Not Holding Charge

Potential causes and solutions if the jump starter's internal battery fails to retain a charge.

Specifications

Before Returning for Repairs

Limited Warranty