EasyManua.ls Logo

Schumacher SJ1332 - User Manual

Schumacher SJ1332
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
0099001902-02
MODEL / MODELO / MODÈLE :
SJ1332
Jump Starter and DC Power Source
Arrancador y Fuente de Poder de CC
Bloc d’alimentation et aide démarrage
OWNERS MANUAL / MANUAL DEL USUARIO
MANUEL D’UTILISATION
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the portable power safely and effectively.
Please read and follow these instructions and precautions carefully.
POR FAVOR CONSERVE ESTE MANUAL DEL USUARIO Y LEALO ANTES
DE CADA USO. En este manual le explica cómo utilizar la fuente de poder de
manera segura y conable. Por favor, lea y siga las siguientes instrucciones y
precauciones.
ESSAYER DE GARDER LE MANUEL D’INSTRUCTIONS ET LE LIRE AVANT
CHAQUE UTILISATION. Ce manuel explique comment utiliser l’unité d’une façon
sûre et efcace. S’il vous plaît lisez et suivez ces instructions et précautions.

Table of Contents

Questions and Answers

  • C
    Chad BaileyJul 28, 2025
    What to do if my Schumacher SJ1332 Remote Starter won't jump start my car?
    • S
      Sabrina CampbellJul 28, 2025
      If your Schumacher Remote Starter won't jump start your car, here are a few things to check: * Ensure the Jump Start/USB switch is turned ON. * Verify the clips are making a good connection to the battery and frame, ensuring connection points are clean. Rock the clamps back and forth for a better connection. * Check the battery charge status by pressing the button on the front of the unit. * Consider having the vehicle's battery checked as it may be defective.
  • S
    Steve ThomasAug 6, 2025
    How to fix a Schumacher SJ1332 Remote Starter battery that won't hold a charge?
    • A
      Alice MartinezAug 6, 2025
      If the battery in your Schumacher Remote Starter won’t hold a charge, the battery may be bad (will not accept a charge). Have the battery checked.
  • K
    Karen RiceAug 17, 2025
    Why won't my Schumacher SJ1332 Remote Starter power my 12V device?
    • D
      Daniel HarmonAug 17, 2025
      If your Schumacher Remote Starter isn't powering your 12V device, consider these possibilities: * Make sure the 12V device is turned on. * Check the battery charge status by pressing the button on the front of the unit. * The 12V device may draw more than 20A, has a short circuit, or the internal fuse has blown. Disconnect the 12V device. The internal 20A fuse needs replacement by a qualified service person.

Summary

Important Safety Instructions

Explosive Gas Hazards

Warning about explosive gases generated by lead-acid batteries during operation.

Electric Shock and Fire Risks

Cautionary notes regarding electric shock and fire hazards associated with the unit.

Safe Operation and Handling Guidelines

Covers essential safety rules for using the jump starter, including placement and usage restrictions.

Personal Safety Precautions

Battery Acid Safety and First Aid

Advises on protective gear, handling acid spills, and first aid for exposure.

Operating Instructions

Charging the Internal Battery

Provides instructions on charging the unit using an extension cord and AC outlet.

Jump Starting a Vehicle

Step-by-step guide on how to safely jump start a vehicle using the unit.

Powering a 12 V DC Device

Air Compressor and Inflator Usage

Converter Operation and Safety

Powering a 120 V AC Device

Troubleshooting and Specifications

Troubleshooting Common Issues

Diagnoses and resolves common problems like unit not starting or powering devices.

Schumacher SJ1332 Specifications

General IconGeneral
Product TypeJump Starter
Battery Voltage12V
Cable Gauge6 AWG
LED LightYes
Clamp TypeHeavy-duty clamps
USB PortsYes
Engine DisplacementUp to 8.0L Gas and 6.0L Diesel

Related product manuals