To Next Page
J
Jason BradyJul 31, 2025
Why is the red LED lit on my Schumacher Media Converter?
- JjgrayJul 31, 2025
The red LED on your Schumacher Media Converter might be on due to several reasons: * The battery voltage could be below 10.5 volts, in which case you should recharge or replace the battery. * The equipment you're using might be drawing too much power. Try using a higher capacity converter or avoid using this equipment with the current converter. * The converter may be too hot, causing a thermal shutdown. Allow the converter to cool, ensure it has adequate ventilation, and reduce the load to the rated continuous power output.
General
