To Next PageTo Next PageWhat to do if Schumacher SC1362 doesn't charge above 10V (12V battery) or 5V (6V battery) after 2 hours?
If your Schumacher Battery Charger fails to bring a 12V battery above 10V, or a 6V battery above 5V after a 2-hour charge, the battery might be faulty. First, ensure that no devices are drawing power from the battery. If there are, disconnect them. If no loads are present, have the battery professionally inspected or replaced.
General| Voltage | 6V/12V |
|---|---|
| Input Voltage | 120V AC |
| Clamps | Heavy-Duty |
| Microprocessor Controlled | Yes |
| Float Mode Monitoring | Yes |
| Type | Battery Charger |
| Battery Types Supported | AGM, Gel |
| Safety Features | Reverse polarity protection, Overcharge protection |
| Cable Length | 6 ft |
General safety guidelines for using the battery charger, including handling cords and attachments.
Warning regarding explosive gases generated by lead-acid batteries and precautions to take.
Precautions for personal safety when working with lead-acid batteries, including protective gear and avoiding sparks.
Guidelines on battery types to charge and warnings about frozen batteries or hazardous chemicals.
Steps for preparing the battery and vehicle before charging, including terminal cleaning and ventilation.
Guidelines for locating the battery charger away from the battery and in a well-ventilated area.
Precautions for connecting and disconnecting DC output clips to prevent sparks and short circuits.
Step-by-step guide for connecting the charger to a battery installed in a vehicle, including polarity checks.
Procedure for connecting the charger to a battery that has been removed from the vehicle.
Guidelines for proper grounding and the safe use of extension cords with the charger.
Instructions for assembling cord wrap cleats for storage of the charger cables.
Explanation of the digital display, buttons, and LED indicators on the charger's control panel.
Step-by-step guide to charging a battery while it is installed in the vehicle.
Step-by-step guide to charging a battery removed from the vehicle.
Instructions for using the 30A Boost mode for quick charging or engine starting.
Details on Charge/Maintain, Automatic, Aborted, Desulfation, and Maintain modes.
Table providing estimated charging times for different battery types and sizes.
How to use the engine start feature for jump-starting a vehicle.
Instructions for using the battery voltage tester and interpreting the readings.
Procedure for testing the vehicle's alternator using the charger's tester function.
Details on power-up idle time limits and switching between charger and tester modes.
List of error codes, their descriptions, and suggested solutions for troubleshooting.
Table addressing common problems, their possible causes, and recommended solutions.
Guidelines for cleaning, maintaining, and storing the battery charger to ensure longevity.
Solutions for issues like engine start failure, setting selection, and display errors.
Contact information and procedures for obtaining repair or return services for the charger.
Technical specifications for the charger's input and output power, and charging capabilities.
Information on the 2-year limited warranty, exclusions, and limitations of liability.
