To Next PageTo Next Page
Need help?Do you have a question about the Schumacher SE-4225 and is the answer not in the manual?
General| Brand | Schumacher |
|---|---|
| Model | SE-4225 |
| Category | Battery Charger |
| Language | English |
Be aware of explosive gases from batteries; follow instructions closely.
Wear eye protection and clothing to prevent injury from acid or sparks.
Wash acid spills immediately and seek medical attention for eye contact.
Avoid sparks or flames near batteries to prevent explosion.
Avoid dropping metal tools on batteries to prevent sparks or short circuits.
Remove metal jewelry when working with batteries to prevent burns.
Use charger only for lead-acid batteries; not for dry-cell or other types.
Never charge a battery that has frozen to prevent explosion.
Avoid overcharging batteries to prevent damage and injury.
Ensure good ventilation around the battery during charging to dissipate gases.
Set charger voltage to match battery voltage and start at the lowest charge rate.
Avoid placing charger directly over battery to prevent corrosion from gases.
Step-by-step guide for charging a battery while it's installed in a vehicle.
Step-by-step guide for charging a battery removed from the vehicle.
Instructions for using the engine start feature to jump-start a vehicle.
Check plug, receptacle, and connections if ammeter shows no reading.
Check for battery defects or severe discharge if ammeter remains high.
Verify battery voltage, check extension cord, or look for weak cells.
Check charger settings or battery condition if an audible clicking sound occurs.
Check connections, wait between cranks, and ensure battery is not severely discharged.
Check AC outlet, power cord, and extension cord for proper connection and power.
