EasyManua.ls Logo

Schumacher SPI2 - 14-15. Maintenance and Storage; Cleaning, Servicing, and Storage; 16. Troubleshooting; Problem Diagnosis and Solutions

Schumacher SPI2
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
BATTERY SIZE/RATING
CHARGE RATE/
CHARGING TIME
2 AMP
SMALL
BATTERIES
Motorcycle,
garden tractor, etc.
6-12 Ah 2-3¾ hrs
12-32 Ah 3¾-10 hrs
CARS/TRUCKS
200-315 CCA 36-46 Ah 11¼-14½ hrs
315-550 CCA 46-58 Ah MAINTAIN ONLY
550-1000 CCA 58-111 Ah MAINTAIN ONLY
MARINE/DEEP-CYCLE
56 Ah MAINTAIN ONLY
86 Ah MAINTAIN ONLY
96 Ah MAINTAIN ONLY
106 Ah MAINTAIN ONLY
14. MAINTENANCE INSTRUCTIONS
14.1 Cleaning and user maintenance should not be done by children without supervision.
14.2 After use and before performing maintenance, unplug and disconnect the battery charger
(see sections 6, 7 and 8).
14.3 Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery
connectors, cords, and the charger case.
14.4 Ensure that all of the charger components are in place and in good working condition, for
example, the plastic boots on the battery clips.
14.5 Servicing does not require opening the unit, as there are no user-serviceable parts.
14.6 $OORWKHUVHUYLFLQJVKRXOGEHSHUIRUPHGE\TXDOL¿HGVHUYLFHSHUVRQQHO
14.7 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
VLPLODUO\TXDOL¿HGSHUVRQVLQRUGHUWRDYRLGDKD]DUG
15. MOVING AND STORAGE INSTRUCTIONS
15.1 Store the charger unplugged, in an upright position. The cord will still conduct electricity
until it is unplugged from the outlet.
15.2 Store inside, in a cool, dry place.
15.3 Do not store the connectors clipped together, on or around metal, or clipped to cables.
15.4 If the charger is moved around the shop or transported to another location, take care to
avoid/prevent damage to the cords, connectors and charger. Failure to do so could result
in personal injury or property damage.
16. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE REASON/SOLUTION
Battery connectors
do not spark when
touched together.
The charger is equipped with an
auto-start feature. It will not supply
current to the battery connectors
until a battery is properly
connected. The connectors will
not spark if touched together.
No problem; this is a normal
condition.
The charger will not
turn on when properly
connected.
AC outlet is dead.
Poor electrical connection.
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and extension
FRUGIRUORRVH¿WWLQJSOXJ