To Next PageTo Next Page
Need help?Do you have a question about the Schumacher SP1296 and is the answer not in the manual?
General| Type | Automatic Battery Charger |
|---|---|
| Input Voltage | 120V AC |
| Input Frequency | 60Hz |
| Charging Current | 2A |
| Weight | 2.2 lbs |
| Battery Type | AGM, Standard, Gel |
| Cable Length | 6 feet |
| Output Voltage | 6V/12V DC |
General safety guidelines for operating the battery charger, including handling, usage, and maintenance.
Critical warning about explosive gases generated by lead-acid batteries and precautions to take.
Precautions for personal safety when working with batteries and the charger, including protective gear.
Steps for connecting the charger to a battery installed in a negative-grounded vehicle.
Steps for connecting the charger to a battery installed in a positive-grounded vehicle.
Step-by-step guide for charging a battery while it is installed in the vehicle.
Step-by-step guide for charging a battery that has been removed from the vehicle.
Instructions for using quick-connect cable connectors for clamps, ring terminals, and accessory plug.
Details on how the charger maintains a full charge and potential issues like abort mode.
Common problems encountered with the charger, their possible causes, and solutions.
Specific troubleshooting steps for when the red LED indicator is lit, indicating battery issues.
