To Next PageTo Next PageWhat to do if Schumacher XM1-5 CHARGING LED is flashing?
If the CHARGING LED on your Schumacher Battery Charger is flashing, it indicates that the charger is in abort mode. See “Aborted Charge” in the OPERATING INSTRUCTIONS Section.
Why Schumacher Battery Charger battery clips do not spark when touched together?
If the battery clips of your Schumacher Battery Charger do not spark when touched together, it is normal. This charger is equipped with an auto-start feature that only supplies current when a battery is properly connected. Unlike traditional chargers, the clips will not spark if touched together.
What to do if Schumacher XM1-5 will not turn on when properly connected (continued)?
If your Schumacher Battery Charger still won't turn on when properly connected, even after initial checks, consider these possibilities: * The battery may be defective, so have it checked. * Ensure the connections at the battery are correct. If they are reversed and the CONNECTED LED is off, unplug the charger and correct the lead connections.
General| Input Voltage | 120V AC |
|---|---|
| Output Voltage | 6V/12V |
| Output Current | 1.5A |
| Amperage | 1.5A |
| Input Frequency | 60Hz |
| Battery Type | AGM, Gel |
| Charging Modes | Trickle Charge |
Read the entire manual before use to prevent serious injury or death.
Explains signal words (DANGER, WARNING, CAUTION, IMPORTANT) and their hazard levels.
Product contains chemicals known to cause cancer and birth defects.
Warnings related to electric shock and fire risks from charger use.
Warnings about explosive gases generated by lead-acid batteries during operation.
Guidelines for using attachments, cords, and maintaining the charger.
Rules for preventing sparks and ignition sources near batteries.
Advises on removing metal items, avoiding tool drops, and protective gear.
Warns about battery acid being corrosive sulfuric acid.
Steps for preparing the battery and charger before initiating a charge.
Instructions on where to locate the charger for safe operation.
Precautions for connecting and disconnecting DC output clips.
Initial steps for charging a battery installed in a vehicle.
Determining battery post polarity and vehicle grounding for connections.
Steps for connecting and charging a battery removed from a vehicle.
Guidelines for using the AC power cord and grounding the charger.
Recommended gauge sizes for extension cords based on length.
Description of LED indicators on the control panel.
Steps for assembling the charger and ensuring components are ready for charging.
Detailed instructions for connecting battery clips or ring terminals.
Explanation of Aborted Charge, Completion of Charge, and Maintain Mode.
Guidance on using the charger to maintain battery charge over time.
Chart to estimate charging times based on battery size and rating.
Instructions for cleaning and inspecting the charger and its components.
Guidelines for safely moving and storing the battery charger.
Identifies common issues and provides solutions for the charger not turning on.
Solutions for flashing charging LEDs and non-sparking clips.
Checks to perform and conditions to consider before seeking repair.
Technical details including voltage, current, size, and weight.
Information on the 2-year limited warranty, coverage, and activation.
