Basic safety notes
05.00 | ELB | Montage- und Betriebsanleitung | en | GAS 376437
65
WARNING
Risk of injury due to unexpected movements of the machine/
system!
Moving the axes may cause serious injuries.
• Before performing assembly and adjustment works, switch off
the energy supply.
• Make sure there is no residual energy in the system.
WARNING
Risk of injury from objects falling and being ejected!
Falling and ejected objects during operation can lead to serious
injury or death.
• Take appropriate protective measures to secure the danger
zone.
WARNING
Risk of burns through contact with hot surfaces!
Surfaces of components can heat up severely during operation.
Skin contact with hot surfaces causes severe burns to the skin.
• For all work in the vicinity of hot surfaces, wear safety gloves.
• Before carrying out any work, make sure that all surfaces have
cooled down to the ambient temperature.
To Next Page
Loading...
