Translation of original EC declaration of incorporation
01/PES-PED/2006-42-EC/de-en/2010-01-12/SW
EC declaration of incorporation
In terms of the EC Machinery Directive 2006/42/EC, annex II B
Manufacturer/
distributor
SCHUNK GmbH & Co. KG.
Spann- und Greiftechnik
Bahnhofstr. 106 – 134
74348 Lauffen/Neckar, Germany
We hereby declare that the following product:
pneumatic escapement modules, single/double escapement
PES 30...PES 48, PED 60…PED 96
0302300…0302668, 0302303…0302671
meets the applicable basic requirements of the Directive Machinery (2006/42/EC).
The incomplete machine may not be put into operation until conformity of the machine into which the
incomplete machine is to be installed with the provisions of the Machinery Directive (2006/42/EC) is
confirmed.
Applied harmonized standards, especially:
Safety of machines - Basic concepts, general principles for design -- Part 1:
Basic terminology, methodology
Safety of machines - Basic concepts, general principles for design -- Part 2:
Technical principles
The manufacturer agrees to forward on demand the special technical documents for the incomplete
machine to state offices.
The special technical documents according to Annex VII, Part B, belonging to the incomplete
machine have been created.
Person responsible for documentation: Mr. Michael Eckert, Tel.: +49(0)7133/103-2204
Location, date/signature:
Lauffen, Germany,
January 2010
To Previous Page
Loading...
Need help?
General
