Why is my Schweigen Ventilation Hood rangehood air suction weak?
Weak air suction in your Schweigen Ventilation Hood can occur due to several reasons. First, ensure there are no obstructions in the ducting or back draft fins, as closed fins can cause this issue. Also, regularly wash the metal filter. Finally, verify the outlet is not blocked and that the correct diameter ducting is installed.
What to do if my Schweigen NAUM-9 Ventilation Hood does not work?
If your Schweigen Ventilation Hood isn't working, start by checking the electrical connection. Ensure the voltage of the electrical network is between 220-240V, the rangehood is connected to a grounded plug, and it's switched on. Also, verify that there is power to the rangehood and the motor switch is on.
What to do if the light on my Schweigen NAUM-9 doesn't work?
If the light on your Schweigen Ventilation Hood isn't working, first check that the lamp switch is in the 'on' position and that the lamps are firmly in place. Also, check that the outlet is open and the lamps and fuse are not broken or faulty.
Why is the Schweigen NAUM-9 Ventilation Hood air suction weak?
Weak air suction in your Schweigen Ventilation Hood can occur if there's an obstruction in the ducting or back draft fins. Ensure these are clear. Also, regularly wash the metal filter and verify that the outlet isn't blocked and that the correct ducting diameter is installed.
General| Brand | Schweigen |
|---|---|
| Model | NAUM-9 |
| Category | Ventilation Hood |
| Language | English |
To Next Page
