EasyManua.ls Logo

Schweigen UM1170-9S - User Manual

Schweigen UM1170-9S
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Revision V4.1
HOME APPLIANCES
www.schweigen.com.au
RANGEHOOD & INSTALLATION GUIDE
UM1170-9S

Table of Contents

Questions and Answers

  • L
    Latoya AdamsJul 31, 2025
    How to troubleshoot a Schweigen Ventilation Hood that does not work?
    • E
      Emily GuerreroJul 31, 2025
      If your Schweigen Ventilation Hood isn't working, begin by ensuring it's properly connected to a power source. Verify that the electric network's voltage is between 220-240V, the hood is connected to a grounded plug, and the unit is switched on. Also, check the motor switch to confirm the rangehood is receiving power and is turned on. Lastly, ensure the lamp switch is in the 'on' position and the outlet is open.
  • D
    Danielle GibbsAug 11, 2025
    Why is the air suction weak in my Schweigen Ventilation Hood?
    • M
      Matthew FrancisAug 11, 2025
      If your Schweigen Ventilation Hood's air suction is weak, start by checking for obstructions in the ducting or back draft fins. Make sure there is no obstruction in ducting or back draft fins. Regularly wash the metal filter. Also, ensure the outlet is open, not blocked, and that you have the correct diameter ducting installed. Finally, consult the Isodrive installation manual to confirm the flexible ducting is installed correctly, paying attention to the length of ducting used and ensuring it remains taut.
  • S
    Scott RobinsonAug 21, 2025
    What to do if the light on my Schweigen Ventilation Hood does not work?
    • B
      Benjamin WolfAug 21, 2025
      If the light on your Schweigen Ventilation Hood isn't working, first check that the lamp switch is in the 'on' position. Then, inspect the lamps themselves to ensure they are in good working order. Also, check the lamps and fuse to make sure they are not broken or faulty.

Summary

Your Safety

Before Installation

Essential safety guidelines and precautions to follow before installing the rangehood.

Product Use

Safe operating procedures and recommendations for using the rangehood during cooking.

Maintenance and Service

Instructions for routine maintenance, cleaning, and when to seek professional service.

Electrical Cord

Safety precautions concerning the rangehood's electrical cord and handling potential damage.

Tips & Suggestions

Operation

Cleaning & Maintenance

Filters

Guidance on filter maintenance, cleaning frequency, and safe washing procedures.

Replacing the Light Bulb

Installation

Mounting Laws and Regulations

Details minimum installation heights and regulatory requirements for safe mounting.

Isodrive Motor Setup

Maintenance

Troubleshooting

Common operational issues, their potential causes, and checks before contacting service.

Calling the Technical Assistance Service Hotline

Faulty Installation

Specification

Schweigen UM1170-9S Specifications

General IconGeneral
Model NumberUM1170-9S
CategoryVentilation Hood
TypeUnder Mount
Light TypeLED
FinishStainless Steel
Number of Motors1
Filter TypeBaffle Filter
Voltage220-240 V
Frequency50 Hz
Width900mm
Control TypeTouch Control

Related product manuals