Why is my Schweigen NAUM-9B Ventilation Hood rangehood air suction weak?
Weak air suction in your Schweigen Ventilation Hood can occur due to several reasons. First, ensure there are no obstructions in the ducting or back draft fins, as closed fins can cause this issue. Also, regularly wash the metal filter. Finally, verify the outlet is not blocked and that the correct diameter ducting is installed.
What to do if my Schweigen NAUM-9B does not work?
If your Schweigen Ventilation Hood isn't working, start by checking the electrical connection. Ensure the voltage of the electrical network is between 220-240V, the rangehood is connected to a grounded plug, and it's switched on. Also, verify that there is power to the rangehood and the motor switch is on.
What to do if the light on my Schweigen NAUM-9B Ventilation Hood doesn't work?
If the light on your Schweigen Ventilation Hood isn't working, first check that the lamp switch is in the 'on' position and that the lamps are firmly in place. Also, check that the outlet is open and the lamps and fuse are not broken or faulty.
Why is the Schweigen Ventilation Hood air suction weak?
Weak air suction in your Schweigen Ventilation Hood can occur if there's an obstruction in the ducting or back draft fins. Ensure these are clear. Also, regularly wash the metal filter and verify that the outlet isn't blocked and that the correct ducting diameter is installed.
How to troubleshoot a Schweigen NAUM-9B Ventilation Hood that does not work?
If your Schweigen Ventilation Hood isn't working, first, ensure it's properly connected to a grounded plug and switched on, with a voltage between 220-240V. Next, check the motor switch to confirm the rangehood has power and is switched on. Also, verify that the lamp switch is in the 'on' position and the outlet is open.
What to do if the light does not work on my Schweigen NAUM-9B?
To fix a light that isn't working on your Schweigen Ventilation Hood, start by checking the lamp switch to ensure it's in the 'on' position. Then, inspect the lamps to confirm they are in proper condition. Finally, check both the lamps and the fuse to ensure they are neither broken nor faulty.
Why is my Schweigen NAUM-9B not directing air out correctly?
If your Schweigen Ventilation Hood isn't directing air out, check the outlet to ensure it's not blocked and that the correct diameter ducting is installed.
General| Brand | Schweigen |
|---|---|
| Model | NAUM-9B |
| Category | Ventilation Hood |
| Number of Motors | 1 |
| Width | 900 mm |
| Lighting | LED |
| Voltage | 220 - 240V |
| Frequency | 50 Hz |
| Suction Power | 900 m³/hr |
| Filter Type | Baffle Filter |
To Next Page
