Schweigen GG-6C - User Manual

Erica BartlettJul 31, 2025

Why is my Schweigen GG-6C air suction weak?

A
Angela WatsonJul 31, 2025
Weak air suction in your Schweigen Ventilation Hood can occur due to several reasons. First, make sure there are no obstructions in the ducting or back draft fins, as closed back draft fins can cause this issue. Regularly wash the metal filter. Ensure the outlet isn't blocked and that the correct diameter ducting is installed. Also, refer to the Isodrive installation manual to verify the flexi ducting is installed correctly, paying attention to the length and tautness of the ducting.

Summary

Welcome

Your State Regulatory Authority

Discusses varying state legislative requirements for rangehood ducting.

Your Safety

General Safety Warnings

Provides critical warnings and precautions for operating and using the rangehood safely.

Before Installation Safety

Details essential safety steps and checks required before installing the rangehood.

Product Use and Electrical Cord Safety

Specifies intended use and provides safety guidelines for the electrical cord.

Ducted vs. Recirculating Installation

Explains the differences between ducted and recirculating rangehood installations and their implications.

Product Description

Main Rangehood Components

Identifies and lists the main parts and components of the rangehood.

Cutout Size Guide

Provides recommended dimensions for cabinet cutouts for the rangehood.

Operation and Controls

Push Button Control Panel

Details the functions of the push button controls on the rangehood.

Speed Control Usage Suggestions

Explains the 3-speed settings and provides usage suggestions for different cooking types.

Cleaning and Maintenance

Cleaning Interior and Exterior Surfaces

Provides instructions and recommendations for cleaning the interior and exterior surfaces of the rangehood.

Filter Maintenance and Safety Warnings

Explains filter importance, cleaning, frequency, and associated fire hazards.

Replacing the Light Bulb

Step-by-step guide on how to safely replace the light bulbs in the rangehood.

Installation Guide

Rangehood Size vs Cooktop Size

Discusses the importance of matching rangehood size to cooktop size for optimal performance.

Cabinet Installation Positioning

Provides guidance on optimal positioning of the rangehood relative to overhead cabinetry.

Mounting Instructions

Details the recommended central mounting of the rangehood over the cooktop.

Installation Height for Induction Cooktops

Recommends specific installation heights for induction cooktops to prevent condensation.

Mounting Points for Body

Illustrates the mounting points for the rangehood body using side and front views.

Installation Example Steps

Step-by-step guide demonstrating the process of installing the rangehood into a cabinet.

Ducting Requirements and Best Practices

Specifies ducting diameter, length limits, and best practices for installation.

Back Draft Fins Installation

Explains the installation procedure for back draft fins on applicable rangehood models.

Adding Optional Carbon Filters

Instructions for fitting optional carbon filters for recirculation mode operation.

Ducting Installation Advice

Provides recommended and to-be-avoided ducting configurations for optimal airflow.

Roof Cowls and Seal Kit Installation

Details installation considerations for roof cowls and seal kits, including ducting.

Condensation Information

Condensation Causes with Induction Cooktops

Explains why induction cooktops cause condensation and contributing factors.

Tips for Reducing Condensation

Provides practical tips to minimize or prevent condensation formation during cooking.

Troubleshooting

Product Not Working and Weak Suction

Lists common issues like no power, light malfunction, or weak suction and their causes.

Service Requests and Faulty Installation Clarifications

Information on lodging service requests and clarifying responsibility for faulty installations.

Specifications

Dimensions and Technical Data

Presents detailed dimensional drawings and technical specifications of the rangehood.

Disclaimer and Disposal

General Disclaimer and E-waste Disposal

Limits liability for information and provides guidance on environmentally responsible appliance disposal.

This document is an installation and user guide for the Schweigen GG-6C rangehood.

Function Description

The Schweigen GG-6C is a rangehood designed for household use to extract cooking fumes from the kitchen. It can be installed as a ducted or recirculating unit. In ducted mode, it expels fumes outside via ducting. In recirculating mode, it filters the air and returns it to the room (requires optional carbon filters). The rangehood features a motor to draw air, filters to capture grease, and lights to illuminate the cooking area.

Important Technical Specifications

Model: GG-6C
Feeding Voltage: 240V 50Hz
Lamp Power (LED): 2 x 1.5W (supplied)
Lamp Power (Halogen): 2 x 35W (optional)
Ducting Diameter: 150mm (MUST be 150mm)
Maximum Ducting Length: 4 metres
Minimum Installation Height (Electric Cooktop): 650mm from hob top surface
Minimum Installation Height (Gas Cooktop): 650mm from hob top surface
Recommended Installation Height (Induction Cooktop): 700-750mm
Main Rangehood Dimensions (approximate cutout size): 491mm (width) x 271mm (depth)
Overall Rangehood Dimensions (Diagram):
- Front Width: 525mm
- Depth: 295mm
- Height (excluding duct outlet): 265mm
- Duct Outlet Height: 76mm
- Duct Outlet Diameter: 150mm
- Filter Dimensions: 265mm x 140mm (approximate)

Usage Features

Control Panel: Push-button control panel with the following functions:
- 0: Turn off the rangehood
- Low Speed Setting: Indicated by a single fan icon
- Medium Speed Setting: Indicated by a double fan icon
- High Speed Setting: Indicated by a triple fan icon
- Light On/Off: Indicated by a light bulb icon
Speed Control Suggestions:
- Low speed: Recommended for simmering.
- Medium speed: Recommended for light cooking.
- High speed: Recommended for heavy frying or heavy cooking.
Pre-cooking Operation: Turn the rangehood motor on 5-10 minutes before starting to cook to help clear vapours.
Post-cooking Operation: Turn the rangehood motor off about 10-15 minutes after finishing cooking to clear remaining vapours.
Induction Cooktop Considerations: To reduce condensation, turn on the rangehood 5-10 minutes prior to cooking, leave it on for 5-10 minutes after, and start cooking at a low-to-medium setting to allow the rangehood to warm up.

Maintenance Features

Cleaning the Interior: Use a damp cloth and a neutral detergent or denatured alcohol. Avoid cleaning electrical parts or the motor with liquids/solvents.
Cleaning the Exterior: Use a soft cloth, water, and liquid soap. Rinse well and dry thoroughly. High-quality cleaning and protection products (e.g., Steel Kleen) can be used. Apply the solution to a soft cloth and rub in the direction of the stained surface. Do not pour liquid directly onto the rangehood. Avoid chemical solvents, aggressive, grainy, abrasive products, naphtha, alcohol, or similar products.
Grease Filters:
- Function: Absorb grease particles during cooking.
- Cleaning Frequency: Every 3-6 weeks or after 40 hours of use. For induction cooktops, clean at least every 10 days.
- Cleaning Method (Hand): Immerse in hot water with suitable detergent, then rinse with plenty of hot water.
- Cleaning Method (Dishwasher): Use a short program at low temperature. Note: Metal mesh filters may change color after washing, which is normal.
- Installation: Ensure filters are completely dry before re-installing. To remove, press the handle, bend slightly, and pull through the front guide. Reverse the process for replacement.
- Warning: Clogged filters reduce efficiency and pose a fire risk. Do not operate the rangehood without grease filters.
Carbon Filters (Optional for Recirculation Mode):
- Installation: Detach grease filter, press lock, pull downward. Plug the activated carbon filter into the unit and turn clockwise. Repeat on the other side. Ensure it's securely locked.
- Replacement Frequency: Every 4 to 6 months, depending on cooking frequency and method.
- Note: Suction power may be lower when carbon filters are attached.
Replacing the Light Bulb:
- Safety: Always switch off and disconnect power before replacing. Bulbs retain heat for a short period after being switched off.
- Steps:
  1. Remove filters.
  2. Gently turn the light bulb clockwise, pull it down, and remove it from the holder.
  3. Insert a new bulb by lining up pins with larger holes in the holder, then turn anti-clockwise to secure.

Brand	Schweigen
Model	GG-6C
Category	Ventilation Hood
Language	English

Brand

Schweigen

Model

GG-6C