How to troubleshoot a Schweigen Ventilation Hood that does not work?
If your Schweigen Ventilation Hood isn't working, start by verifying the electrical connection. Ensure the voltage is between 220-240V, the hood is connected to a grounded plug, and it's switched on. Also, check the motor switch to confirm the hood is receiving power and is turned on.
Why is the air suction weak on my Schweigen Ventilation Hood?
If you notice weak air suction in your Schweigen Ventilation Hood, start by checking for any obstructions in the ducting or back draft fins. Weak suction may be caused by back draft fins remaining closed. Additionally, ensure the metal filter is clean, as a dirty filter can restrict airflow. Regularly wash the metal filter. Also, ensure the outlet is open and not blocked and that the correct diameter ducting is installed.
What to do if the light doesn't work on my Schweigen Ventilation Hood?
If the light on your Schweigen Ventilation Hood isn't working, first, check that the lamp switch is in the 'on' position. Then, make sure the lamps are firmly in place. Verify that the outlet is open. Finally, inspect the lamps and fuse to ensure they are not broken or faulty.
General| Brand | Schweigen |
|---|---|
| Model | GG-901B |
| Category | Ventilation Hood |
| Width | 900 mm |
| Lights | LED |
| Finish | Stainless Steel |
| Motor | External |
| Filters | Baffle Filters |
| Material | Stainless Steel |
| Airflow | 1600 m³/h |
| Extraction Rate | 1600 m³/h |
| Control | Touch |
| Control Type | Touch |
| Filter Type | Baffle |
| Motor Type | Brushless DC Motor |
| Suction Power | 1600 m³/h |
To Next Page
