_n_. _RH Section_
Page 11
Danger
Always switch o and disconnect the power cord before replacing any lights. Failure to do
so may cause serious injury. Please be aware that the light bulb will retain heat for a short
period of time after being switched o.
5. Cleaning & Maintenance
Replacing the Lights
Step 2
Gently turn light bulb anti-
clockwise, pull the light bulb
down and remove it from the
light holder.
Step 3
Insert a new light bulb by lining
up the pins of the light bulb with
the larger holes inside the light
holder. Once the pins are in place,
turn clockwise to secure the light
bulb.
Step 1
Remove the lters from
the rangehood.
To Next Page
Loading...
