Getting Started With the SEL-3355-2 Date Code 20180212
10
Step 2. The User Account Control may ask for confirmation that you understand the program being
launched can be used to make changes to the computer. Click Yes, or provide your account
credentials, to indicate that it is acceptable to proceed.
Step 3. In the Device Manager window, verify that there are no missing device drivers by opening Other
devices, if it is present, and ensuring that there are no Unknown device listings. If there are
unknown devices listed, then there are device drivers that are not installed. All drivers that are
nondefault Microsoft drivers are included on the Literature and Software DVD. For assistance in
identifying which driver to install, contact your SEL customer service representative.
Step 4. Click on Network adapters and Ports (COM & LPT) to verify that the correct number of serial
and Ethernet ports are listed.
Note: The number of ports will depend on ordering options.
Software
Perform the following steps to verify that all the software packages ordered with the SEL-3355-2 have been installed:
Step 1. Click the Start button, type programs and features in the box, then select Programs and
Features.
Ethernet Ports
Serial Ports
To Next Page
Loading...