A-CR-CCP-402/MB-001 SCHWEIZER 2-33 AOIs
A-2
LEFT WING
30. Wing Strut: condition ( )
31. Wing Strut Bolts: in, castle nuts on & safetied, washers as required ( )
32. Dive Brake: hinges, connections, security & wear ( )
33. Wing Skin: condition ( )
34. Outrigger Wheel & Spring: condition & wear ( )
35. Ailerons & Pushrods: condition, movement & security ( )
36. Spoilers: springs, condition, movement, security ( )
REAR FUSELAGE
37. Centre Section Fairing: condition, fasteners secure ( )
38. Wing Attachment Bolts: in & safetied, washers, spacers & castle nuts ( )
39. Fabric: condition, inspection covers ( )
EMPENNAGE
40. Vertical Stabilizer: condition, security ( )
41. Horizontal Stabilizer: condition, security ( )
42. Horizontal Stabilizer Lift Struts: attachment & safetied ( )
43. Tail Wheel Assembly: condition, attachment, security, wear, rotation ( )
44. Rudder & Elevator: condition, movement, security ( )
45. Rudder Cable & Elevator Push Rod: condition, security ( )
46. Inspection Plate Cover: secure ( )
RIGHT WING
47. Spoilers: spring, condition, movement, security ( )
48. Ailerons & Pushrods: condition, movement & security ( )
49. Outrigger Wheel & Spring: condition & wear ( )
50. Wing Skin: condition ( )
51. Dive Brake: hinges, connections for security & wear ( )
52. Wing Strut: condition ( )
53. Wing Strut Bolts: in, castle nuts on & safetied, washer ( )
Enter all major & minor unserviceabilities in the journey log defect column.
SIGNATURE: LICENCE NO:
Remark: This inspection sheet should be reproduced locally on an 8 ½” by 14” sheet.
(Glider DI Sheet amended 2016)
To Next Page
Loading...
