AirDyne AD7, AD8, AD Pro: Why is there no power to my battery
powered console?
Follow this troubleshooting guide to help resolve power issues on the Schwinn AirDyne AD7, AD8, and AD Pro.
Some common complaints may include:
Console will not turn on
Machine will not turn on
Console turns on partially
Console turns off or goes to sleep during use
Follow these steps to troubleshoot the issue
Tools you may need:
(2) D batteries
Phillips head screwdriver
6mm hex/Allen wrench, or the wrench that came from the
hardware card included with your machine
1. Remove the battery cover on the back of the console using a Phillips head screwdriver and remove the two D batterie
(reference 1). Reinstall the batteries. Make sure that the batteries are oriented correctly, with the terminals matching
the indicators in the battery compartment[13886.A]. If the issue persists with the original batteries re-inserted,
replace with two new D-sized batteries[13886.B].
(Reference 4)
AD7 console is shown. Your machine's console may vary.
The battery compartment cover is highlighted in red. Replace the existing batteries with two new D-sized batteries.
2. If the issue persists, remove the console and mast assembly from your bike using a 6mm Allen wrench. Inspect the
console and cable connections for damage (reference 2). If the console or cable coming from the console is
ID:13886.1
To Next Page
Need help?
General
