11
■ Moving your Schwinn Evolution Bike
Make sure that the handlebar is securely attached to the bike
and that the pop pin has been turned clockwise until tight.
Standing in front of the bike, grasp the handlebars at their very
ends. Place one foot on the lower stabilizer bar and tilt the bike
towards you. Once the bike has tilted enough to engage the
transport wheel, you will be able to easily roll the bike in any
direction. Be gentle while moving the bike as any sudden impact
may affect the operation of the machine.
■ Leveling the unit
The Schwinn Evolution Bike can be leveled to compensate for
uneven surfaces. To level the bike, raise or lower the four
leveling bolts located on the underside of the legs using an
adjustable wrench (Fig 10.).
FIG.9
FIG.10
To Next Page
Loading...
