This guide describes the basic operation and troubleshooting for the ExionLC
TM
PDA Detector . Read this guide
thoroughly before using the product and operate the product in accordance with the instructions in this guide.
This guide provides safety instructions and precautions to make sure that the user operates the system safely.
Follow all Warning and Caution instructions provided in the guide. For more information, refer to the Hardware
User Guide for the ExionLC
TM
system.
Keep this guide for future reference. Make sure that it is accessible to the operator of the system.
Electrical Precautions
WARNING! Electrical Shock Hazard. Do not remove the covers. Removing the covers
might cause injury or malfunctioning of the system. The covers need not be removed
for routine maintenance, inspection, or adjustment. Contact the SCIEX FSE for repairs
that require the covers to be removed.
For information on system electrical specifications, refer to the Site Planning Guide.
AC Mains Supply
Connect the system to a compatible AC mains supply as instructed in this guide.
WARNING! Electrical Shock Hazard. Use only qualified personnel for the installation
of all electrical supplies and fixtures, and make sure that all installations adhere to
local regulations and safety standards.
WARNING! Electrical Shock Hazard. Make sure that the system can be disconnected
from the AC mains supply outlet in an emergency. Do not block the AC mains supply
outlet.
CAUTION: Potential System Damage. Do not unpack or connect any system components.
The FSE will unpack, connect, and configure the system for the proper operating voltage.
ExionLC™ PDA DetectorOperator Guide
5 of 47RUO-IDV-05-1842-B
1
Introduction
To Next Page
Loading...