Scooterpac Ignite | User Manual 34
9.5 Cleaning & Maintenance
9.5.1 Rubber Mats
The rubber mat should be cleaned using a vacuum cleaner with an upholstery brush attached. For stains, a mild mixture of
upholstery soap and water may be used, ensuring that the area is thoroughly dried afterwards.
TOP TIP – Please do not use bleach.
9.5.2 P aintwork
To care for the paint, regularly wash the Ignite using soft cloths and a mild automotive detergent.
Apply automotive polish to achieve a high-shine finish. It is highly recommended that polish is applied in areas where the
paintwork may be exposed to adverse weather conditions.
TOP TIP – Never use boiling water to clean the Ignite.
To Next Page
Loading...
