Scooterpac Invader | User Manual 22
9.6.2 Engaging the B rake Lock
The Invader has a brake lock that will prevent it from
rolling even when parking the unit on a hill. To engage
the brake lock follow the below:
1. Pull the brake lever on the left-hand side towards
you as much as you can.
2. Take the latch with your other hand or other
finger and pull it into the grooves of the brake
lever.
3. Release brake lever and make sure the brakes are
stuck in a pressed position.
To disengage the brake lock, just pull the brake lever
towards you slightly more and the brake lock latch will
pop out. Release the brake lever and you are ready to go!
9.6.3 Reversing
Hold down the green button on the left handlebar (see
fig 3.) whilst gently twisting the throttle lever (see fig. 7).
This will engage the reversing mode.
To Next Page
Loading...
