Scooterpac Invader | User Manual 24
9.7 Display
1. Display Gauge - This display shows you how
fast you are going in km/h.
2. Speed – This needle gauge rises clockwise in
correspondence to the numbers, creating a
visual representation of how fast you are
travelling in km/h.
3. Odometer/Tripmeter – On ignition, this
shows how many cumulative kilometres you
have travelled overall on your Invader for five
seconds. After which it changes to a journey
tripmeter, measuring the distance travelled
since starting. This resets each time you turn
the vehicle off.
4. Battery Meter - This shows how much power
you have left before you need to charge. Once
your charge is below 50% we recommending
charging.
*PLEASE NOTE* The battery meter will dip
down when the Invader is in motion. The
metre will return to the previous position
when becoming stationary. This is normal.
Figure 16 - Digital LCD Display
To Next Page
Loading...
