Scooterpac Invader | User Manual 32
1 0. 6 Maintenance
• Always ensure that your tyre pressure is set to the recommended pressures.
• Check your brakes before operating, making sure they are firm and the Invader does not move while they are
being pulled.
• Check that all lights are working; headlights brake lights and signal lights.
• When storing the Invader outside, use a cover to prevent weather damage. If possible, store inside otherwise, if
possible, bring the battery inside.
• Ensure your Invader undergoes a yearly service and safety check at your local Scooterpac dealer.
• Do not overcharge the battery once the battery is fully charged unplug it as soon as possible.
10.6.1 Cleaning
10.6.1.1 Seat
The seat should be wiped with a soft dry cloth. Do not use abrasive cleaning materials, and do not use bleach. To restore
the deep black colour a vinyl cleaning spray may be used.
10.6.1.2 P aintwork
To care for the paint, regularly wash the Invader using soft cloths and a mild automotive detergent.
Apply automotive polish to achieve a high-shine finish. It is highly recommended that polish is applied in areas where the
paintwork may be exposed to adverse weather conditions.
TOP TIP – Never use boiling water to clean the Invader.
To Next Page
Loading...
