Scooterpac Invader | User Manual 29
1 0. 3 Circuit Breaker / Fuse
Behind the seat you will find two bolts that lock the seat rest to the machine. Using an Allen Key, unscrew the two bolts
seen below and lift the bar up to access the under-seat compartment.
*PLEASE NOTE* This is area is not meant to be used for storage.
To prevent surges that may damage the unit, the Invader comes with a circuit breaker. This is located underneath the seat
just above the controller. The blue switch in the event of a surge will trigger and turn the whole unit off.
If the Invader does not turn on at all (the display does not light at all once the key is in the ignition) it is most likely that the
circuit breaker is set to off. Open the seat lock (see previous page for where the lock is located) and switch this switch to on.
Circuit breakers
Circuit breaker
To Next Page
Loading...
