Scosche CR1277 User Manual

1
© 2003 SCOSCHE INDUSTRIES, INC. ALL RIGHTS RESERVED
FOR MORE INFORMATION VISIT www.scosche.com
OR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490
2002-2003
CHRYSLER
PT CRUISER
4-DR
NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH. ABSOLUTE
ACCURACY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCE
GUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY OCCUR
..
..
.
Year:
2001-2003 Make:
Chrysler Model: PT Cruiser
IN-DASH APPLICATION:
Dash Type: Chrysler Contoured DIN+1/2
Kit: CR1277
Harness: CR02
Antenna Adapter:CRA Antenna:CR301
CD Changer Interface: DCCHYAS
FRONT SPEAKERS:
Door:
7" Chrysler 3-tab speaker mounted to steel Depth 3”
WHEN INSTALLING AN AFTERMARKET 5 ¼ OR 6 ½” SPEAKER, A SPEAKER ADAPTER IS REQUIRED. WE RECOMMEND THE SCOSCHE SA656 SPEAKER
ADAPTER.
REAR SPEAKERS:
Pillar: Standard 6x8" speaker mounted to steel depth 2 3/4”
When installing an aftermarket 5 ¼ or 6 ½” speaker, a speaker adapter is required. We recommend the
Scosche SA68 speaker adapter.
WIRE COLOR CODES:
+12V Constant = Pink
+12V Accessory Switched = Red/White
-12V Chassis Ground = Black
+12V Dimmer = Orange
LF+ = Green/Violet
LF- = Brown/Blue
RF+ = Violet
RF- = Blue/Red
LR+ = Brown/Yellow
LR- = Brown/Blue
RR+ = Blue/White
RR- = Blue/Black

Scosche CR1277 Specifications

General

Brand	Scosche
Model	CR1277
Category	Automobile Accessories
Language	English

Summary

In-Dash Application Details

Dash Type and Installation Kit

Details the Chrysler Contoured DIN+1/2 dash type and the CR1277 installation kit for aftermarket radios.

Harness and Adapters

Specifies the CR02 harness, CR301 antenna adapter, and DCCHYAS CD changer interface for the in-dash system.

Front Speaker Specifications

Factory Speaker Size and Adapter Requirement

Describes the factory 7" 3-tab door speaker and the need for an adapter for aftermarket 5-1/4" or 6-1/2" speakers.

Recommended Front Speaker Adapter

Recommends the Scosche SA656 speaker adapter for front door speaker installations.

Rear Speaker Specifications

Factory Speaker Size and Adapter Requirement

Describes the factory 6x8" pillar speaker and the need for an adapter for aftermarket 5-1/4" or 6-1/2" speakers.

Recommended Rear Speaker Adapter

Recommends the Scosche SA68 speaker adapter for rear pillar speaker installations.

Wire Color Codes

Power and Ground Wires

Lists wire color codes for +12V Constant, +12V Accessory Switched, and -12V Chassis Ground connections.

Speaker Output Wires

Details wire color codes for +12V Dimmer, LF, RF, LR, and RR speaker connections.

Preliminary Installation Steps

Battery Disconnection

Instruction to disconnect the negative battery cable before starting installation.

Antenna Location

Identifies the factory antenna location at the right front fender panel.

Radio Removal and In-Dash Installation

Radio Removal Procedure

Steps for removing the factory radio, including unsnapping window control, removing dash bezel, and extracting screws.

Aftermarket Radio Installation

Notes the need for an installation kit and recommends the Scosche CR1277 for aftermarket radio installation.

Front Door Speaker Installation

Door Panel Removal

Instructions for removing the front door panel, including unsnapping fasteners and extracting screws.

Speaker Removal and Replacement

Steps for extracting factory speakers and installing aftermarket ones using a recommended adapter.

Rear Pillar Speaker Installation

Rear Pillar Panel Removal

Instructions for unsnapping and removing the rear pillar panel to access speakers.

Speaker Removal and Replacement

Steps for extracting factory speakers and installing aftermarket ones using a recommended adapter.