Scosche TA2121B - Disassembly and Initial Steps; Step 1: Air Vent Panel Removal; Step 2: Radio Screw Removal; Step 3: Wiring Disconnection

2
3
INSTALLATION GUIDE INSTALLATION GUIDE
Disassembly
Disassembly
Disassembly
Disassembly
Kit Assembly
Kit Assembly Continued
Step 2
Step 1
Step 5
Step 3
Step 4
Remove (4) screws securing
the radio in place (circled).
Using a PRT (Panel Removal
Tool) remove the air vent duct
panel surrounding the OEM
radio unit (dashed highlighted
area)
Unplug all wiring
Remove radio from the dash cavity
and unscrew brackets from the
OEM radio
1. Attach the pocket provided onto TA2121B face panel using the screws provided.
2. Attach LEFT and RIGHT brackets onto the face panel pocket assembly
3. Place and secure single DIN radio onto the assembly, screw brackets to the radio
(Not shown inf gures).
1. Attach LEFT and RIGHT brackets onto the face panel.
2. Secure double DIN radio onto the assembly, screw brackets to the radio unit (Not
shown in gures).
DOUBLE DIN RADIO
SINGLE DIN RADIO
Single DIN Exploded View (Pocket)
Double DIN Exploded View
Single DIN Assembled View (Pocket)
Double DIN Assembled View
NOTE: When mounting both brackets to the
radio unit only use “A” screw locations only!
Bracket Side View
TA2121B 02/16TA2121B 02/16