To Next PageTo Next Page
Need help?Do you have a question about the Scosche TAQ04 and is the answer not in the manual?
Steps for accessing 12V power during vehicle disassembly.
Procedure to test the Qi module functionality and connections before installation.
Instructions for connecting the universal 12-volt power harness to the vehicle.
Information regarding foreign object detection and its impact on charging.
Specifies the required battery voltage range for the Qi module operation.
Description of the LED indicator lights and their meaning for charging status.
Place the TAQ04 Direct Fit bezel into the pocket panel.
Mark the hole location for the connector using chalk or marker.
Create a hole for the USB type-c connector to pass through.
Connect the power t-harness to the Qi module and vehicle connectors.
Pass the Type-C connector through the pocket and TAQ04 bezel.
Reassemble components in reverse order and place the Qi device.
Steps for accessing 12V power during vehicle disassembly.
Procedure to test the Qi module functionality and connections before installation.
Instructions for connecting the universal 12-volt power harness to the vehicle.
Information regarding foreign object detection and its impact on charging.
Specifies the required battery voltage range for the Qi module operation.
Description of the LED indicator lights and their meaning for charging status.
Place the TAQ04 Direct Fit bezel into the pocket panel.
Mark the hole location for the connector using chalk or marker.
Create a hole for the USB type-c connector to pass through.
Connect the power t-harness to the Qi module and vehicle connectors.
Pass the Type-C connector through the pocket and TAQ04 bezel.
Reassemble components in reverse order and place the Qi device.
General| Brand | Scosche |
|---|---|
| Model | TAQ04 |
| Category | Automobile Accessories |
| Language | English |
