To Next PageTo Next Page
Need help?Do you have a question about the Scotsman AF 80 and is the answer not in the manual?
Min/max air, water, pressure parameters for AF 80.
Graphs showing AF 80 ice production vs. temperature.
Physical measurements of the AF 80 model.
Min/max air, water, pressure parameters for AF 100.
Graphs showing AF 100 ice production vs. temperature.
Physical measurements of the AF 100 model.
Min/max air, water, pressure parameters for AF 200.
Graphs showing AF 200 ice production vs. temperature.
Physical measurements of the AF 200 model.
Min/max air, water, pressure parameters for AF 20.
Graphs showing AF 20 ice production vs. temperature.
Physical measurements of the AF 20 model.
Min/max air, water, pressure parameters for AF 30.
Graphs showing AF 30 ice production vs. temperature.
Physical measurements of the AF 30 model.
Overview of the manual and icemaker's quality.
Procedures for checking the unit upon delivery and removing packaging.
Guidelines for placing and leveling the ice maker for optimal operation.
Instructions for safe and correct electrical hookup of the icemaker.
How to connect the water supply and drainage systems.
A list of checks before starting the icemaker.
Practical steps and considerations for installing the unit.
Step-by-step guide for initiating the icemaker's operation.
Verifying proper function post-startup, including sensors and controls.
Explanation of how water flows and is processed within the icemaker.
Details on the refrigerant cycle, components, and pressures.
Description of the mechanical components driving ice production.
Description of sensors for temperature, water level, ice level, and motor operation.
The central control unit and its configuration settings.
Float reservoir, freezing cylinder, ice breaker, motors, valve, and compressor.
How to set the correct water level in the evaporator.
Procedures for replacing various temperature, level, and motor sensors.
Replacing PC board, ice spout, auger, bearings, seals, and gear motor.
Replacing drier, condensers, water valve, and compressor.
Electrical schematic showing connections for air and water-cooled models.
Explains the meaning of each LED on the PC board for status monitoring.
Diagnosing issues indicated by LED status lights and startup failures.
Troubleshooting intermittent operation, low ice output, and no ice production.
Addressing issues like leaks, noise, motor problems, and water supply issues.
General guidelines and frequency for maintenance and cleaning.
Specific maintenance tasks for the ice-making unit, including checks and cleaning.
Procedures for cleaning the water system and reservoir with solutions.
General
