Need help?Do you have a question about the Scotsman C1448R and is the answer not in the manual?
Describes placement constraints for remote condenser, including rise, drop, and line length.
Details voltage, phase, circuit ampacity, and fuse sizes for the ice machine.
Specifies maximum rise, drop, and line length for condenser placement relative to the ice machine.
Outlines prohibited routing configurations and requirements for line sets.
Advises on locating the condenser as near as possible to the interior ice machine location.
Provides instructions for routing pre-charged refrigerant lines, including hole sizing and coiling.
Step-by-step guide for connecting pre-charged refrigerant lines using self-sealing couplings.
Specifies connection to cold, potable water and the need for a hand-actuated valve.
Details hard-wiring, power requirements, and junction box connections for the ice machine.
A comprehensive list of checks to perform before starting the ice machine.
Step-by-step guide for the initial startup sequence of the ice machine.
Essential steps to take before contacting service personnel for issues.
To Next Page
General
