Scotsman CSE60 - User Manual

CSE60
June 2001
Page 1
INTRODUCTION
Service Parts lists and Wiring diagrams are located in the center of this manual, printed on
yellow paper.
This manual was printed on recycled paper.
Keep this manual for future reference.
Note the Warning symbol, it marks a possible hazard.
This service manual covers the installation,
operation, maintenance and service of this ice
machine.
Table of Contents
SPECIFICATIONS········································· Page 2
FOR THE INSTALLER ······································ Page 3
FOR THE PLUMBER ······································· Page 4
INSTALLATION ·········································· Page 5
INITIAL START UP ········································ Page 6
HOW IT WORKS: ········································· Page 7
COMPONENT LOCATION ···································· Page 8
HOW IT WORKS: ········································· Page 9
HOW IT WORKS: ········································· Page 10
HOW IT WORKS: ········································· Page 11
OPERATION & ADJUSTMENT: OPERATING CHARACTERISTICS ··············· Page 12
GRAPH OF SYSTEM PRESSURES ······························· Page 13
SANITIZING AND CLEANING ·································· Page 14
SERVICE DIAGNOSIS ······································ Page 15
SERVICE DIAGNOSIS ······································ Page 16
REMOVAL AND REPLACEMENT································· Page 17
REMOVAL AND REPLACEMENT································· Page 18

Summary

INTRODUCTION

SPECIFICATIONS

FOR THE INSTALLER

Location Requirements

Guidelines for placing the ice machine, including room temperature and air circulation.

FOR THE PLUMBER

Water and Drain Connections

Instructions for connecting water supply and drain lines to the ice maker.

Electrical Connections

Guidelines for connecting the ice maker to the electrical supply.

INSTALLATION

Final Check

Checklist for verifying all installation steps are completed correctly before operation.

INITIAL START UP

HOW IT WORKS

Component Description

Explanation of the function of various internal components of the ice maker.

Water Cycle Explanation

Details on how water is used and flows during the ice making process.

Refrigeration System

Diagram illustrating the refrigerant flow and components in the cooling system.

Harvest Cycle

Description of how the ice is released from the molds and dropped into the bin.

COMPONENT LOCATION

OPERATION AND ADJUSTMENT

Operating Characteristics

Information on system pressures, cycle times, and compressor amp draw.

Adjustment of the Cube Size

Instructions for modifying the size of the ice cubes produced.

Adjustment of the Bin Thermostat Control

Guide for adjusting the bin thermostat to control ice level.

GRAPH OF SYSTEM PRESSURES

SANITIZING AND CLEANING

SERVICE DIAGNOSIS

REMOVAL AND REPLACEMENT

Bin Thermostat Replacement

Steps for removing and replacing the bin thermostat.

Cube Size Control Replacement

Instructions for removing and replacing the cube size control.

Refrigeration System Maintenance

Important considerations when servicing the refrigeration system.

Spray Platform Removal

Steps for removing and replacing the spray platform.

Water Inlet Valve Replacement

Instructions for removing and replacing the water inlet valve.

Water Pump Replacement

Steps for removing and replacing the water pump.

Scotsman CSE60 Specifications

General

Type	Under Counter Ice Maker
Production Capacity	60 lbs per day
Ice Type	Cube
Condenser Type	Air-Cooled
Power Supply	115V/60Hz
Refrigerant	R-134A