Scotsman CSE60 - SPECIFICATIONS

CSE60
June 2001
Page 2
2 .2"
3/4" HOSE COUPLING
THREAD
2 .2"
1 .76"
POWER
CORD
25/32" OD
18"
3.83"
20.5"
5" to
5.5"
SPECIFICATIONS
The finish is stainless steel with a galvanized
back panel. Minimum circuit ampacity is used to
determine wire size per national electric code.
Refrigerant type is R-134a.
OPERATING REQUIREMENTS:
MINIMUM MAXIMUM
Air Temperature 50
0
F. 100
0
F.
Water Temperature 40
0
F. 100
0
F.
Water Pressure 20 PSIG 100 PSIG
Voltage 103.5V 126.5V
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of UL, CUL and NSF.
Scotsman assumes no liability or responsibility
of any kind for products manufactured by
Scotsman that have been altered in any way,
including the use of any parts and/or other
components not specifically approved by
Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to
change without notice.
SCOTSMAN
MODEL
SERIAL
AMP
REFRIGERANT
PHASE
Hz
Oz
VOLT
NAMEPLATE LOCATION
SPECIFICATIONS
17 9/16"
5 .4"
28 9/16"
Refrigerant Charge is 9 ½ oz of R-134a. Always
go by the nameplate.
Model Number Dimensions
H"XW"XD"
W/out legs
Cube
Size
Basic
Electrical
Max. Fuse Size
CSE60A-1A 28.56 X 18 X 20.5 Medium 115/60/1 15