NUUndercounterIceMakerUserManual ScheduledMaintenance
B12
Troubleshooting analysis (inspection items to
do before calling the service provider)
Ice maker out of work (all the lamps are not
on)
Whether the manual switch is ‘on’?
Whether the fuse in the fuse box has
blown?
Whether the power plug is plugged in?
Whether the power switch on the front
panel is “on”?
Low ice capacity or low efficiency
Whether the water supply switch has been
switched on?
Whether the water temperature or ambient
temperature is too high?
Whether there is heat source near the
machine or bad ventilation around the
machine?
Ice cube shape is poor
Whether the water supply is sufficient?
Whether the air filter is blocked?
Whether some spiracles on the spray bar
are blocked?
Important:
The machine should be maintained by authorized
maintenance people.
If a wire is damaged, in order to avoid danger, call
authorized maintenance people to replace it.