GENIUS
18 2011 SCOTT BIKE OWNERS MANUAL
GENIUS
19
ENGLISH
remount the cap of the cable
housing window on the shock by
turning them clockwise using a
1.5 mm allen key and a maximum
tightening torque of 0.3Nm
9
Important:
Please note that the maximum pressure of the Equalizer 2 shock is 28.0bars/406psi in
the positive chamber and 22.4bars/325psi in the negative chamber and which means
a maximum weight of the rider of 110kg/243lbs incl. riding gear and load.
RECOMMENDED TOOLS FOR THE SHOCK SET-UP
For the set-up of the shock we recommend to use a shock pump with a scale up to 40
bars/600 psi with a special air valve connector preventing from air getting away while
removing the pump from the shock valve, this will result in an exact air pressure.
Pleasenotethatairwillflowintothehoseandindicatorwhencountercheckingthe
airpressure,soyouhavetosetupagaintherecommendedpressureafterthisaction.
Makesuretobalanceatleastthisairlosswhenyoumakeacheckoftheairpressure
oftheshock.Plsalsonotethattheindicatorsofshockpumpshaveatoleranceof
max.10%
To Next Page
Loading...
Need help?
General
