ON/ Standby mode
After connecting the speaker cables and the power supply (refer to CONNECTIONS),
the main unit Standby led indicator lights up. It is in standby mode and the clock time is
displayed. Press the ON/STANDBY button to turn on the unit and press it again to go to
Standby mode.
Clock time setting
Set the clock
1. Press CLOCK button on the remote control and “Hour digits” will flash.
2. Press / button to set hour.
3. Press CLOCK button to confirm and the “Minute digits” will flash.
4. Press / button to set minute.
5. Press CLOCK button again to confirm the time setting.
24/12 Hour clock display
Long press CLOCK button 5 seconds and “24 HOUR” will flash. Press CLOCK button to
select 12 Hour clock display and press button to confirm.
GB-6
BASIC OPERATIONS
SOURCE select
At ON mode, press the SOURCE button repeatedly to select the source: TUNER
(for radio), IPOD (for iPod), CD, AUX, UDISK (for USB) and SD/MMC.
VOLUME control
Rotate VOLUME knob on the main unit or press VOLUME +/- button on the remote control to
adjust sound volume level up to maximum “32” that “MAX” displays. Last volume level within
the range “0” and “18” is resumed while the last volume level higher than “18” is always
restored to the level “18” to avoid the risk of an electric shock when it is turned on.
MUTE function
Press MUTE button on the remote control to shut off the sound. The symbol “ ” displays.
Press it again or VOLUME +/- button on the remote control, or rotate VOLUME knob on the
main unit to resume the sound.
XBASS function
EQ function
Press EQ button on the remote control repeatedly to select your desired music mode:
FLAT ROCK JAZZ CLASSIC POP
Press XBASS button on the remote control to boost the bass effect. The symbol “ ”
is displayed.
To Next Page
Loading...
Need help?
General