Start playback
1. At ON mode, press SOURCE button to select “CD”.
2. Press OPEN/CLOSE button to open the CD tray.
3. Insert a disc with the label side facing up onto the CD tray.
4. Press OPEN/CLOSE button again to close the CD tray. It
will read the disc and after reading, the disc information
will display for a short moment.
For CD files, the total number of tracks and total duration will display.
For MP3/ WMA files, the total number of folders and tracks will display.
Then, it will automatically start playback from the first track.
During playback:
For CD files, the track number and elapsed track duration
will display.
For MP3/ WMA files, the elapsed track
duration will display. Also, the folder
number and the track number will
display a short moment alternately in
cycle.
Pause playback
Stop playback
ID3 display (for MP3/ WMA files only)
Press ID3 button on the remote control to display the names of the
song/ artist/ album, (if this information is available). The text “ID3” is
displayed. Press it again to cancel the ID3 display.
Search function
GB-8
CD / MP3 / WMA OPERATION
Press button to pause the playback and the elapsed track
duration will flash. Press it again to resume playback.
Press /BAND button to stop playback. Press button start playback from the first track.
Skip to next/ previous track
1. Press button to skip to next track.
2. Press button once to skip to the beginning of the current track. Press it twice to skip to
previous track.
Search within a track
During playback, hold down the / button to go fast backwards or fast forwards and
then release the button. It will resume normal playback from that point.
Skip to next/ previous folder (for MP3/ WMA files only)
Press / button to skip to next/ previous folder.
To Next Page
Loading...
Need help?
General