Page 15 of 20
E. CLEANING & MAINTENANCE
I. DESCALING
When
is flashing, it indicates that the appliance needs to undergo descaling. The appliance
will remain in the best condition if this function is performed at least once a month or more
regularly depending on the hardness of water used. Follow the procedures below:
Note: The complete descaling process will take approximately 30 minutes. Do not switch off
the appliance or unplug during the process.
1. Fill the water tank to “MAX” level.
2. Add one pack of cleaning agent into the water tank.
Important: Do not use vinegar or other cleaning agents to do descaling for this appliance. It
can damage the appliance.
3. Plug in the appliance.
4. Place a large container with at least 1.5L capacity under the coffee spout.
5. Switch on the appliance.
6. Press and hold and Espresso button simultaneously for 5 seconds. A beep sound
will be heard,
and Espresso button
will be flashing.
7. Press Espresso button to confirm to undergo descaling process.
8. will be flashing which indicates that the appliance is undergoing descaling process.
Note: Small amount of water will periodically depense automatically during the descaling
process.
Caution: Hot water can burn or scald. Do stay away.
9. When all water in the water tank is dispensed out, and Espresso button
will be
flashing. Remove all the remaining cleaning agent in the water tank, fill the tank with tap
water to the “MAX” level. When water is filled, will stop flashing. The appliance will
continue the descaling process.
10. When the descaling process completes, the appliance will switch off automatically.
To Next Page
Loading...