SCOTT SPARK - Twinloc Remote Control Basic Set-Up; Nude 2 Shock Setup

SPARK
16 2011 SCOTT BIKE OWNERS MANUAL
SPARK
17
ENGLISH
Create a loop and put it into the
open groove on the remote wheel..
6
Pull the cable tight...
7
...then tighten the headless 4mm-
screw by using a 2mm-Allen key
(max 1.3Nm)
8
Put on the end cap and make sure
to have at least 17mm of free cable
length.
9
In Traction Mode about parallel to
shock body
hang in cable
17mm (min)
view from below
C_spark_en.indd 16-17 03.04.10 13:57