KeyPad service manual
Rev.1.1
Using the < or > keys move the blinking curser to the ‘Operation’ mode or the
‘Utilities‘ mode Press
1.6.2 Language Selection
Using the < or > keys move the blinking curser to the language of choice. The
menu commands will then appear in the selected language. Press
1.6.3 Set-Up Menu
Return to Main Menu to set operation parameters.
Using the < or > keys move the blinking curser to the ‘Operation’ mode. Press
.
1.6.4 Setting Operating Temperature
Enter the required ‘Target Temperature’. Target Temperature is the required
operating temperature. To change the Target Temperature, use the numeric
keypad and over write with the desired value.
Press
Caution: The maximum digestion temperature for polypropylene
tubes is 130 C. If higher digestion temperatures are required, use
the appropriate glass or Teflon replacement tubes. A full listing of
available tubes is located on Page 17.
TARGET TEMPERATURE?
25 TO 180 XXX.X C
UTILITIES VER X.X
EN FR DE IT ES
To Next Page
Loading...
Need help?
General
