5
DigiPREP Digestion Blocks
Version 16.0
DigiPROBE can be calibrated with DigiPREP
controllers or the PC Classic controller (with
Go2Temp software). Please see your controller
manual for calibration instructions.
DigiSET
DigiSET (optional) can be used with all
DigiPREP systems to monitor and suspend the
heating cycle at a pre-set sample volume level.
DigiSET probe is connected to the DigiSET
unit and 'COM 2' from DigiSET unit is connect-
ed to the 'COM 2' of the controller with the sup-
plie cable. Please consult the DigiPREP control-
ler manual for more detailed instructions.