SCS Sentinel CodeAccess RFID - F- Using; F1- Fast Programming

14 en
F- USING
F1- Fast programming
Programming a code
Programming a badge
Door opening
Enter
programming
code
Enter
programming
code
Present the badge(s) to the keypad (each
programmed badge will automatically
increment the user number)
Trigger the opening through user code
To trigger the opening with a badge, you only have to present the badge in front of the keypad.
Exit
programming
mode
Exit
programming
mode
Programmed user code
Confirm
Confirm
Confirm
Confirm ConfirmUser code to 4 digits
(except 1234)
Add a code
Add a badge
User number
(from 1 to 100)
Default master code (999999)
Default master code (999999)
Confirm