16 en
To delete a card user by card. Note
users can be deleted continuously
without exiting programming mode
2 Read Card #
To delete a card user by user ID. This
option can be used when a user has
lost their card
2 User ID #
To add a card and PIN user in card and PIN mode ( 3 1 # )
To Add a card and Pin user
(The PIN is any four digits between
0000 & 9999 with the exception of
1234 which is reserved.)
Add the card as for a card user Press
* to exit from the programming mode
Then allocate the card a PIN as follows:
* Read card 1234 # PIN # PIN #
To change a PIN in card and PIN
mode (Method 1) Note that this is
done outside programming mode
so the user can undertake this
themselves
* Read Card Old PIN # New PIN #
New PIN #
To change a PIN in card and PIN
mode (Method 2) Note that this is
done outside programming mode
so the user can undertake this
themselves
* ID number # Old PIN # New PIN #
New PIN #
To delete a Card and PIN user just
delete the card
2 User ID #
To add and delete a card user in card mode ( 3 0 # )
To Add and Delete a card user
The operating is the same as adding and
deleting a card user in 3 2 #
TO DELETE ALL USERS
To delete all users. Note that this is
2 0000 # a dangerous option so use
with care
2 0000 #
TO UNLOCK THE DOOR
For a PIN
user Enter the PIN then press #
For a card User
Read card
For a card and PIN user
Read card then enter PIN #
To Next Page
Loading...
