SDC Emlock 1571 - EZ - 1510 W-2 Holding Force Upgrade; EZ - 1570 W-2 Energy Saver Upgrade

sdcsecurity.com service@sdcsecurity.com
SECURITY DOOR CONTROLS
EZ Option Upgrade Kits - Emlock© 1512 / 1572
Remove cover plate screws.
1 2
Remove
cover plate.
6
Place magnetic coil
firmly between core
lamination as shown.
Connect
magnetic bond
sensor wires to the
input module B
Option connector
as shown.
5
Connect
upgrade coils
+
3
4
5
6
7
8
EZ – 1510W-2 Holding Force Upgrade
EZ – 1570W-2 Energy Saver Upgrade
Remove cover plate screws.
2
Remove
cover plate.
3
6 7
Lift input modules
and magnetic
coils from
the case.
Place magnetic coil
firmly between core
lamination as shown.
Connect
magnetic bond
sensor wires to the
input module B
Option connector
as shown.
Place input modules
vertically between posts
at each side of case.
upgrade coils
Cradle
Position Posts
+
3
4
5
6
7
8
+
3
4
5
6
7
8
+
3
4
5
6
7
8
2
Remove
cover plate.
3
6 7
Lift input modules
and magnetic
coils from
the case.
Place magnetic coil
firmly between core
lamination as shown.
Connect
magnetic bond
sensor wires to the
input module B
Option connector
as shown.
Place input modules
vertically between posts
at each side of case.
Cradle
Position Posts
PC Board
+
3
4
5
6
7
8
+
3
4
5
6
7
8
Input module wiring.8
B Option
Connector
B Option
Magnetic Bond Sensor
D Option
Door Status Sensor
12 or 24 VDC
LOCKED - NO
COM
UNLOCKED - NC
CLOSED - NO
COM
OPEN - NC
4
Disconnect and
remore coils
+
3
4
5
6
7
8
Remove cover plate screws.
1 2
Remove
cover plate.
6
9
Attach cover plate.
Place magnetic coil
firmly between core
lamination as shown.
sensor wires to the
5
Connect
upgrade coils
+
3
4
5
6
7
8
Remove cover plate screws.
1 2
Remove
cover plate.
6
9
Attach cover plate.
Place magnetic coil
firmly between core
lamination as shown.
Connect
magnetic bond
sensor wires to the
input module B
Option connector
as shown.
5
Connect
upgrade coils
+
3
4
5
6
7
8
Input module wiring.8
B Option
Connector
B Option
Magnetic Bond Sensor
D Option
Door Status Sensor
Magnetic Core
Connector
12 or 24 VDC
LOCKED - NO
COM
UNLOCKED - NC
CLOSED - NO
COM
OPEN - NC
3
7
Lift input modules
and magnetic
coils from
the case.
4
Place input modules
vertically between posts
at each side of case.
Cradle
Position Posts
PC Board
+
3
4
5
6
7
8
+
3
4
5
6
7
8
Disconnect and
remore coils
+
3
4
5
6
7
8
Input module wiring.8
B Option
Connector
B Option
Magnetic Bond Sensor
D Option
Door Status Sensor
Magnetic Core
Connector
12 or 24 VDC
LOCKED - NO
COM
UNLOCKED - NC
CLOSED - NO
COM
OPEN - NC
Lift input modules
and magnetic
4
Place input modules
vertically between posts
at each side of case.
Cradle
Position Posts
PC Board
+
3
4
5
6
7
8
+
3
4
5
6
7
8
Disconnect and
remore coils
+
3
4
5
6
7
8
Remove cover plate screws.
1
9
Attach cover plate.
5
Connect
upgrade coils
+
3
4
5
6
7
8
All 1511, 1512, 1513, 1571, 1572 and 1573 magnetic coils are field interchangeable without removing the lock from the frame. There is no reason
to remove and ship a lock for exchange.
Benefits of this interchangeability include:
• EZ-1510W Holding Force Upgrade: Exchange 1200 lb coil with
1650 lb holding force coil
• EZ-1570W Energy Saver Upgrade: Save on power supply and
long term energy costs by exchanging 8.4 Watt,1650 lb coil
with 3 Watt, 1200 lb holding force coil
• Eliminate labor, shipping costs and time associated with special
orders or complete lock removal and replacement.
Applications
Distributors with limited stock may exchange coils to fulfill specific
special sales needs, i.e. a 1570 with Dark Bronze finish may be
upgraded to a 1511 with dark bronze finish and visa versa.
Installers may field upgrade to an Energy Saver where power supply
capacity is limited or upgrade to higher holding force where 1200 lbs
holding force proves inadequate, i.e. psychiatric or rehab center
applications.
Specify 2 for 1512, 1572