sdcsecurity.com service@sdcsecurity.com
SECURITY DOOR CONTROLS
EZ Option Upgrade Kits - Emlock© 1582
1
3
2
Input module wiring.
Install lock per installation instructions
Attach door status module to armature
Remove cover plate Place anti-tamper switch as shown
Position cover depresses switch
arm when mounted
Anti-tamper wiring
1
3
2
Door Status Sensor
12 or 24 VDC
Install lock per installation instructions
Attach door status module to armature
Remove cover plate Place anti-tamper switch as shown
Position cover depresses switch
arm when mounted
Anti-tamper wiring
1
3
2
Door Status Sensor
12 or 24 VDC
3 4
2
Input module wiring. Annunciation
Install lock per installation instructionsAttach door status module to armature
Replace cover platePlace anti-tamper switch as shown
Position cover depresses switch
arm when mounted
Anti-tamper wiring
Com
No
NC
Locked Unlocked
3
4
2
Magnetic Core
Connector
D Option
Door Status Sensor
12 or 24 VDC
NOT USED
CLOSED - NO
COM
OPEN - NC
3 4
2
Input module wiring. Annunciation
Install lock per installation instructions
Replace cover platePlace anti-tamper switch as shown
Position cover depresses switch
arm when mounted
Anti-tamper wiring
Com
No
NC
Locked Unlocked
3
4
2
Magnetic Core
Connector
D Option
Door Status Sensor
12 or 24 VDC
NOT USED
CLOSED - NO
COM
OPEN - NC
EMLock EZ Kits
Field Upgradeable Option Modules
SDC’s patented EMLock design represents the pinnacle of magnetic lock evolution.
The modular EMLock assembly makes them easy to stock, install, upgrade and maintain.
Field Upgradeable by Distributors, Installers and Maintenance Staff
No need to ever remove a lock from the frame to upgrade or exchange
internal components.
FIELD UPGRADE
• Magnetic Bond Sensor
• Door Status Sensors
Specify 2 for 1582
EZ-D-80: DOOR
POSITION SENSOR
Modular Kit
Indicates the door is open
and closed.
Application:
Door position status annunciation,
anti-tailgating, interlock, mantrap and
communicating bathroom system
logic.
Output:
SPDT Dry Contact, 250 mA @ 12/24VDC
To Next Page
Loading...