SDL Atlas Vortex M6 - Operating the Vortex M6; Running Pre-Programmed Cycles

__________________ Vortex M6
15
4.0 Operation

4.1 RunningaPre‐ProgrammedCycle

4.1.1 Verifytheinstrumentispluggedintoaproperpowersource

4.1.2 Pressandreleasethe“Power”buttonlocatedontheupperrightcornerofthe
faceplate.Thescreenwilllightupanddisplaythefollowingandthendisplay
themaincontrolscreen.








